Purpose
Describe the steps you need to build and test a 1.8 Lustre system (MGS, MDT, MDS, OSS, OST, client) on a CentOS 5.5 machine.
Prerequisite
- A newly installed CentOS 5.5 x86_64 machine with the hostname: client-10.
- EPEL Repository: this is a convenient source for git.
Overview
Lustre 1.8 servers require a patched and compiled kernel. Patches are readily available in the Whamcloud git source repository. A test suite is included with the Lustre 1.8 source. This document walks through the steps of patching the kernel, building Lustre and running a basic test of the complete system.
Procedure
The procedure requires that a OS is setup for development - this includes Lustre sources, kernel source and build tools. Once setup, a new kernel can be patched, compiled, run and tested. Further reading on building a CentOS RPM based kernel is available on the CentOS site.
Provision Machine
Once CentOS 5.5 is newly installed on client-10 login as root.
- Install required kernel development tools.
yum -y groupinstall "Development Tools"
yum -y install rpm-build redhat-rpm-config unifdef gnupg quilt git
|
- Create a user
build
with the home directory /build
- Switch to the user
build
and change to the build $HOME
directory.
- Get the 1.8 branch from the Whamcloud git account.
git clone git://git.whamcloud.com/fs/lustre-release.git
cd lustre-release
git checkout --track -b b1_8 origin/b1_8
|
- Run
sh ./autogen.sh
- Resolve any outstanding dependencies until
autogen.sh
completes successfully. Success will look like:
[root@client-10 lustre-release]# sh ./autogen.sh
Checking for a complete tree...
checking for automake-1.9 >= 1.9... found 1.9.6
...
Running automake-1.9...
configure.ac: installing `./install-sh'
configure.ac: installing `./missing'
configure.ac:9: installing `./config.guess'
configure.ac:9: installing `./config.sub'
Running autoconf...
[root@client-10 lustre-release]#
|
Prepare the kernel source
In this walk-thru, the kernel is built using rpmbuild - a tool specific to RPM based distributions.
- Get the kernel source. First create the directory structure, then get the source from the RPM. Create a
.rpmmacros
file to install the kernel source in our user dir.
cd $HOME
mkdir -p kernel/rpmbuild/{BUILD,RPMS,SOURCES,SPECS,SRPMS}
cd kernel
echo '%_topdir %(echo $HOME)/kernel/rpmbuild' > ~/.rpmmacros
|
- Install the kernel source:
rpm -i http://mirror.centos.org/centos/5.5/updates/SRPMS/kernel-2.6.18-194.32.1.el5.src.rpm 2>&1 | grep -v mockb
|
- Expand the source. Using rpmbuild will also apply CentOS patches.
cd ~/kernel/rpmbuild/SPECS
rpmbuild -bp --target=`uname -m` ./kernel-2.6.spec
|
This will end with:
...
+ patch -p1 --fuzz=2 -s
+ echo 'Patch #20240 (xen-hvm-add-hvmop_get_time-hypercall.patch):'
Patch #20240 (xen-hvm-add-hvmop_get_time-hypercall.patch):
+ patch -p1 --fuzz=2 -s
+ echo 'Patch #20241 (xen-fix-64-bit-pv-guest-user-mode-segv-crashing-host.patch):'
Patch #20241 (xen-fix-64-bit-pv-guest-user-mode-segv-crashing-host.patch):
+ patch -p1 --fuzz=2 -s
+ exit 0
|
At this point, we now have kernel souce, with all the CentOS patches applied, residing in the directory /build/kernel/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.x86_64
Patch the kernel source with the Lustre code.
- Add a unique build id so we can be certain our kernel is booted. Edit
~build/kernel/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.x86_64/Makefile
and modify line 4, the EXTRAVERSION
to read:
- enter the directory
/build/kernel/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.x86_64
cd /build/kernel/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.x86_64
|
- overwrite the
.config
file with /build/lustre-release/lustre/kernel_patches/kernel_configs/kernel-2.6.18-2.6-rhel5-x86_64.config
cp /build/lustre-release/lustre/kernel_patches/kernel_configs/kernel-2.6.18-2.6-rhel5-x86_64.config ./.config
|
- link the Lustre series and patches
ln -s ~/lustre-release/lustre/kernel_patches/series/2.6-rhel5.series series
ln -s ~/lustre-release/lustre/kernel_patches/patches patches
|
- Apply the patches to the kernel source using quilt
quilt push -av
...
...
Applying patch patches/md-avoid-bug_on-when-bmc-overflow.patch
patching file drivers/md/bitmap.c
Hunk #1 succeeded at 1161 (offset 1 line).
Hunk #3 succeeded at 1224 (offset 1 line).
patching file include/linux/raid/bitmap.h
Applying patch patches/jbd2_stats_proc_init-wrong-place.patch
patching file fs/jbd2/journal.c
Hunk #1 succeeded at 1042 (offset 143 lines).
Now at patch patches/jbd2_stats_proc_init-wrong-place.patch
|
Build the new kernel as an RPM.
- Go into the kernel source directory and issue the following commands to build a kernel rpm.
cd /build/kernel/rpmbuild/BUILD/kernel-2.6.18/linux-2.6.18.x86_64
make oldconfig || make menuconfig
make include/asm
make include/linux/version.h
make SUBDIRS=scripts
make include/linux/utsrelease.h
make rpm
|
- A successful build will return:
...
...
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Checking for unpackaged file(s): /usr/lib/rpm/check-files /var/tmp/kernel-2.6.18lustre18-root
Wrote: /build/kernel/rpmbuild/SRPMS/kernel-2.6.18lustre18-1.src.rpm
Wrote: /build/kernel/rpmbuild/RPMS/x86_64/kernel-2.6.18lustre18-1.x86_64.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.35163
+ umask 022
+ cd /build/kernel/rpmbuild/BUILD
+ cd kernel-2.6.18lustre18
+ exit 0
rm ../kernel-2.6.18lustre18.tar.gz
|
NOTE If you receive a request to generate more entropy, you need to trigger some disk I/O or keyboard I/O. I would recommend (in another terminal):
grep -Ri 'whamcloud' /usr
|
At this point, you should have a fresh kernel RPM /build/kernel/rpmbuild/RPMS/x86_64/kernel-2.6.18lustre18-1.x86_64.rpm
Configure and build Lustre
- Configure Lustre source
[build@client-10 linux-2.6.18.x86_64]$ cd ~/lustre-release/
[build@client-10 lustre-release]$ ./configure --with-linux=/build/kernel/rpmbuild/BUILD/kernel-2.6.18lustre18/
...
...
LLCPPFLAGS: -D__arch_lib__ -D_LARGEFILE64_SOURCE=1
CFLAGS: -g -O2 -Werror
EXTRA_KCFLAGS: -include /build/lustre-release/config.h -g -I/build/lustre-release/lnet/include -I/build/lustre-release/lnet/include -I/build/lustre-release/lustre/include
LLCFLAGS: -g -Wall -fPIC -D_GNU_SOURCE
Type 'make' to build Lustre.
|
- make rpms:
[build@client-10 lustre-release]$ make rpms
...
...
Wrote: /build/kernel/rpmbuild/RPMS/x86_64/lustre-debuginfo-1.8.5.54-2.6.18_194.32.1.el5.lustre18_201103071000.x86_64.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.15638
+ umask 022
+ cd /build/kernel/rpmbuild/BUILD
+ cd lustre-1.8.5.54
+ rm -rf /var/tmp/lustre-1.8.5.54-root
+ exit 0
make[1]: Leaving directory `/build/lustre-release'
|
- You should now have build the following, similarly named, rpms:
ls ~build/kernel/rpmbuild/RPMS/x86_64/
lustre-debuginfo-1.8.5.54-2.6.18_lustre18_201103081147.x86_64.rpm
lustre-tests-1.8.5.54-2.6.18_lustre18_201103081147.x86_64.rpm
lustre-source-1.8.5.54-2.6.18_lustre18_201103081147.x86_64.rpm
lustre-modules-1.8.5.54-2.6.18_lustre18_201103081147.x86_64.rpm
lustre-1.8.5.54-2.6.18_lustre18_201103081147.x86_64.rpm
lustre-ldiskfs-3.1.5-2.6.18_lustre18_201103081148.x86_64.rpm
lustre-ldiskfs-debuginfo-3.1.5-2.6.18_lustre18_201103081148.x86_64.rpm
kernel-2.6.18lustre18-1.x86_64.rpm
|
Installing the Lustre kernel and rebooting.
- As root, Install the kernel
[root@client-10 ~]# rpm -ivh ~build/kernel/rpmbuild/RPMS/x86_64/kernel-2.6.18lustre18-1.x86_64.rpm
|
- Check that
/boot/grub/menu.lst
contains the correct default kernel to boot. This is typically 0:
reboot
- connect with conman, and watch the machine come up
- view the login prompt with satisfaction:
CentOS release 5.5 (Final)
Kernel 2.6.18-lustre18 on an x86_64
client-10.lab.whamcloud.com login:
|
Installing Lustre.
- Change to
root
and Change directory into /build/kernel/rpmbuild/RPMS/x86_64/
- Install modules
lustre-modules
and user space tools lustre-
rpm -ivh /build/kernel/rpmbuild/RPMS/x86_64/lustre-modules-1.8.5.54-2.6.18_lustre18_*.x86_64.rpm /build/kernel/rpmbuild/RPMS/x86_64/lustre-1.8.5.54-2.6.18_lustre18_*.x86_64.rpm /build/kernel/rpmbuild/RPMS/x86_64/lustre-ldiskfs-3.1.5-2.6.18_lustre18_*.x86_64.rpm
|
Installing e2fsprogs
e2fsprogs is needed to run the test suite.
- Download e2fsprogs from http://build.whamcloud.com/job/e2fsprogs-master/
- Install with
rpm -ivh e2fsprogs
ENDS~