...
| Code Block |
|---|
#Setting ARP so it doesn't broadcast
sysctl -w net.ipv4.conf.all.rp_filter=0
sysctl -w net.ipv4.conf.ib0.arp_ignore=1
sysctl -w net.ipv4.conf.ib0.arp_filter=0
sysctl -w net.ipv4.conf.ib0.arp_announce=2
sysctl -w net.ipv4.conf.ib0.rp_filter=0
sysctl -w net.ipv4.conf.ib1.arp_ignore=1
sysctl -w net.ipv4.conf.ib1.arp_filter=0
sysctl -w net.ipv4.conf.ib1.arp_announce=2
sysctl -w net.ipv4.conf.ib1.rp_filter=0
sysctl -w net.ipv4.conf.ib2.arp_ignore=1
sysctl -w net.ipv4.conf.ib2.arp_filter=0
sysctl -w net.ipv4.conf.ib2.arp_announce=2
sysctl -w net.ipv4.conf.ib2.rp_filter=0
sysctl -w net.ipv4.conf.ib3.arp_ignore=1
sysctl -w net.ipv4.conf.ib3.arp_filter=0
sysctl -w net.ipv4.conf.ib3.arp_announce=2
sysctl -w net.ipv4.conf.ib3.rp_filter=0
ip neigh flush dev ib0
ip neigh flush dev ib1
ip neigh flush dev ib2
ip neigh flush dev ib3
echo 200 ib0 >> /etc/iproute2/rt_tables
echo 201 ib1 >> /etc/iproute2/rt_tables
echo 202 ib2 >> /etc/iproute2/rt_tables
echo 203 ib3 >> /etc/iproute2/rt_tables
ip route add 192.168.0.0/16 dev ib0 proto kernel scope link src 192.168.1.1 table ib0
ip route add 192.168.0.0/16 dev ib1 proto kernel scope link src 192.168.2.1 table ib1
ip rule add from 192.168.1.1 table ib0
ip rule add from 192.168.2.1 table ib1
ip route add 172.16.0.0/16 dev ib2 proto kernel scope link src 172.16.1.1 table ib2
ip route add 172.16.0.0/16 dev ib3 proto kernel scope link src 172.16.2.1 table ib3
ip rule add from 172.16.1.1 table ib2
ip rule add from 172.16.2.1 table ib3
ip route flush cache |
...
| Code Block |
|---|
#Setting ARP so it doesn't broadcast sysctl -w net.ipv4.conf.all.rp_filter=0 sysctl -w net.ipv4.conf.ib0.arp_ignore=1 sysctl -w net.ipv4.conf.ib0.arp_filter=0 sysctl -w net.ipv4.conf.ib0.arp_announce=2 sysctl -w net.ipv4.conf.ib0.rp_filter=0 sysctl -w net.ipv4.conf.ib1.arp_ignore=1 sysctl -w net.ipv4.conf.ib1.arp_filter=0 sysctl -w net.ipv4.conf.ib1.arp_announce=2 sysctl -w net.ipv4.conf.ib1.rp_filter=0 ip neigh flush dev ib0 ip neigh flush dev ib1 echo 200 ib0 >> /etc/iproute2/rt_tables echo 201 ib1 >> /etc/iproute2/rt_tables ip route add 192.168.2.0/24 dev ib1 proto kernel scope link src 192.168.2.2 table ib1 ip route add 192.168.1.0/24 dev ib0 proto kernel scope link src 192.168.1.2 table ib0 ip rule add from 192.168.1.2 table ib0 ip rule add from 192.168.2.2 table ib1 ip route flush cache # Try to get the system in the following state: [root@trevis-402 ~]# ip route show table ib1 192.168.2.0/24 dev ib1 proto kernel scope link src 192.168.2.2 [root@trevis-402 ~]# ip route show table ib1 192.168.2.0/24 dev ib1 proto kernel scope link src 192.168.2.2 # Also make sure to flush the arp cache from the other nodes, so that there is no confusion with addressing. |