Versions Compared

Old Version 6

changes.mady.by.user Serguei Smirnov

Saved on

compared with

New Version 7

changes.mady.by.user Serguei Smirnov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Primary Requirement ID

Secondary Requirement ID

Unit Test ID

Unit Test Description




  • Setup: configure single network, 3 NIDs on the network 
  • Execute UDSP "Show" command 
  • Verify that the resulting YAML file doesn't contain any policy description



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives two of the interfaces highest priority
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives two of the interfaces highest priority
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected
  • Add UDSP rule that lowers the priority of one of the NIDs with highest priority back to default
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected



  • Setup: configure two networks, two NIDs on each network
  • Add UDSP rule that gives one of the networks highest priority
  • Add UDSP rule that gives the highest priority to one of the NIDs on the network with the highest priority
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected (for network and NID)
  • Delete UDSP rule that gives the highest priority to one of the NIDs
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected (for network)
  • Delete UDSP rule that gives the highest priority to one of the networks
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file doesn't contain any policy description



  • Setup: configure single network, 3 NIDs on the network locally, 3 NIDs on the remote peer
  • Add UDSP rule that gives priority to one of the remote peer's NIDs
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected
  • Delete UDSP rule that gives the highest priority to the remote peer's NID
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file doesn't contain any policy description



  • Setup: configure single network, 3 NIDs on the network locally, 3 NIDs on the local peer
  • Add UDSP rule that gives priority to a pair of the local NID and peer's NID
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected
  • Delete UDSP rule that gives the highest priority to the NID pair
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file doesn't contain any policy description



  • Configure single local network with two NIDs on the network 
  • Configure two routers/gateways each providing access to a remote network
  • Configure remote peer to have access to the remote network with two NIDs
  • Add UDSP rule that designates a pair of a router and remote peer NID as preferred
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected
  • Delete UDSP rule that gives the highest priority to the router/remote NID pair
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file doesn't contain any policy description



  • Configure single local network with two NIDs on the network 
  • Configure two routers/gateways each providing access to a remote network
  • Configure remote peer to have access to the remote network with two NIDs
  • Add UDSP rule that designates a pair of a router and local network as preferred
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected
  • Delete UDSP rule that gives the highest priority to the router/local network pair
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file doesn't contain any policy description

Error UT

Primary Requirement ID

Secondary Requirement ID

Unit Test ID

Unit Test Description




  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives two of the interfaces highest priority
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected
  • Execute UDSP "Delete" command providing policy index that doesn't exist
  • Verify that the command failed with an error





Single Network Configuration

...

Primary Requirement ID

Secondary Requirement ID

Unit Test ID

Unit Test Description




  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives one of the interfaces highest priority
  • Start traffic TODO: need to specify direction?
  • Stop traffic
  • Verify that the NID with the highest priority was used



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives two of the interfaces highest priority
  • Start traffic
  • Stop traffic
  • Verify that two NIDs with the highest priority were used 



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives two of the interfaces highest priority
  • Start traffic
  • Stop traffic
  • Verify that two NIDs with the highest priority were used
  • Add UDSP that lowers the priority of one of the NIDs with highest priority back to default
  • Start traffic
  • Stop traffic
  • Verify that the remaining highest-priority NID was used



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives two of the interfaces highest priority
  • Start traffic
  • Stop traffic
  • Verify that two NIDs with the highest priority were used
  • Add UDSP that lowers the priority of both of the NIDs with the highest priority back to default
  • Start traffic
  • Stop traffic
  • Verify that all NIDs were used



  • Setup: configure single network, 3 NIDs on the network, 3 NIDs on the local peer
  • Add UDSP rule that gives the highest priority to one of the local peer NIDs
  • Start traffic
  • Stop traffic
  • Verify that local peer NID with the highest priority was used



  • Setup: configure single network, 3 NIDs on the network, 3 NIDs on the local peer
  • Add UDSP rule that creates 3 NID pairs such that one of the peer NIDs is not in any pair
  • Start traffic
  • Stop traffic
  • Verify that the peer NID that is not part of any pair was not used



  • Setup: configure single network, 3 NIDs on the network 
  • Start traffic
  • Verify that all NIDs are were used
  • Add UDSP rule that gives one of the interfaces highest priority
  • Verify that the NID with the highest priority is usedStop trafficwas used
  • Stop traffic



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives one of the interfaces highest priority
  • On the peer, add UDSP rule that gives one of the peer interfaces highest priority
  • Start traffic
  • Stop traffic
  • Verify that the NIDs with the highest priority were used on both sides, except for responses TODO: can this be verified?

Out-of-Range UT

Primary Requirement ID

Secondary Requirement ID

Unit Test ID

Unit Test Description




  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives highest priority to a NID that doesn't exist
  • Execute UDSP "Show" command
  • Verify that the resulting YAML file contains policy description as expected

Error UT

Primary Requirement ID

Secondary Requirement ID

Unit Test ID

Unit Test Description



  • Setup: configure single network, 3 NIDs on the network 
  • Add UDSP rule that gives
two
  • one of the interfaces highest priority
Execute UDSP "Show" command
  • Start traffic
  • Verify that
the resulting YAML file contains policy description as expected
  • the NID with the highest priority was used
  • Bring the highest priority NID down
  • Verify that remaining NIDs are used
  • Stop traffic
  • Execute UDSP "Delete" command providing policy index that doesn't exist
    • Verify that the command failed with an error

    Multiple Network Configuration

    Expected Behavior

    In-Range UT

    Primary Requirement ID

    Secondary Requirement ID

    Unit Test ID

    Unit Test Description




    • Setup: configure two networks, two NIDs on each network
    • Add UDSP rule that gives one of the networks highest priority
    • Start traffic
    • Stop traffic
    • Verify that NIDs on the network with the highest priority were used



    • Setup: configure two networks, two NIDs on each network
    • Add UDSP rule that gives one of the networks highest priority
    • Start traffic
    • Stop traffic
    • Verify that NIDs on the network with the highest priority were used
    • Add UDSP rule that reverses networks priorities
    • Start traffic
    • Stop traffic
    • Verify that NIDs on the new network that has the highest priority were used



    • Setup: configure two networks, two NIDs on each network
    • Add UDSP rule that gives one of the networks highest priority
    • Add UDSP rule that gives the highest priority to one of the NIDs on the network with the highest priority
    • Start traffic
    • Stop traffic
    • Verify that the NID with highest priority on the network with highest priority was used



    • Setup: configure two networks, two NIDs on each network
    • Add UDSP rule that gives one of the networks highest priority
    • Add UDSP rule that gives the highest priority to one of the NIDs on the network with the lowest priority
    • Start traffic
    • Stop traffic
    • Verify that the NIDs on the network with highest priority were used



    • Setup: configure two networks, two NIDs on each network
    • Add UDSP rule that gives one of the networks highest priority
    • On the peer add UDSP rule that gives the highest priority to the other network
    • Start traffic
    • Stop traffic
    • Verify that both networks were used

    Out-of-Range UT

    Primary Requirement ID

    Secondary Requirement ID

    Unit Test ID

    Unit Test Description

    Error UT




    • Setup: configure two networks, two NIDs on each network 
    • Add UDSP rule that gives highest priority to a network that doesn't exist
    • Execute UDSP "Show" command
    • Verify that the resulting YAML file contains policy description as expected



    • Setup: configure two networks, two NIDs on each network 
    • Add UDSP rule that gives one of the networks highest priority
    • Start traffic
    • Verify that the network with the highest priority was used
    • Bring the highest priority network down
    • Verify that the remaining network is used
    • Stop traffic

    Primary Requirement ID

    Secondary Requirement ID

    Unit Test ID

    Unit Test Description

    Routed Network Configuration

    Expected Behavior

    In-Range UT

    ...

    Primary Requirement ID

    Secondary Requirement ID

    Unit Test ID

    Unit Test Description

    Error UT

    Unit Test Description




    • Configure single local network with two NIDs on the network 
    • Configure two routers/gateways each providing access to a remote network
    • Configure remote peer to have access to the remote network with two NIDs
    • Add UDSP rule that designates a pair of a router that doesn't exist and a local network as preferred
    • Start traffic
    • Stop traffic
    • Verify that both routers were used



    • Configure single local network with two NIDs on the network 
    • Configure two routers/gateways each providing access to a remote network
    • Configure remote peer to have access to the remote network with two NIDs
    • Add UDSP rule that designates a pair of a router and a local network that doesn't exist as preferred
    • Start traffic
    • Stop traffic
    • Verify that both routers were used



    • Configure single local network with two NIDs on the network 
    • Configure two routers/gateways each providing access to a remote network
    • Configure remote peer to have access to the remote network with two NIDs
    • Add UDSP rule that designates a pair of a router that doesn't exist and a remote peer NID as preferred
    • Add UDSP rule that gives the same remote peer NID highest priority
    • Start traffic
    • Stop traffic
    • Verify that the all peer NIDs and both routers were used



    • Configure single local network with two NIDs on the network 
    • Configure two routers/gateways each providing access to a remote network
    • Configure remote peer to have access to the remote network with two NIDs
    • Add UDSP rule that designates a pair of a router and local network as preferred
    • Start traffic
    • Verify that the preferred router was used
    • Bring down the preferred router
    • Verify that the remaining router was used
    • Stop traffic

    Primary Requirement ID

    Secondary Requirement ID

    Unit Test ID

    Functional Requirements


    Performance Requirements

    Glossary

    ...